Toy Torque & Tension Test Clamps

A set of claw clamps, seam clamps, stud clamps, torque clamps and test loads used to grip toy components and seams during torque and tension (pull) tests.

Items in this range

Seam Clamp

Stuffed toys and beanbag-style toys use for the Tension Test for Seams.
The jaws of the clamps used to hold the material on either side of the seam to be examined must be fastened with washers of 34 in. (19 mm) in diameter.

Application of Seam Clamp

It is used for the Tension Test for Seams in Stuffed Toys and Beanbag-Type Toys
The clamps used to grip the material on either side of the seam to be tested shall have jaws to which are attached 3⁄4-in. (19-mm) diameter washers

Long Mouth Clamp

Application of Long Mouth Clamp

It is used for assisting with tension test

Testing Standards

ISO8124-1,EN71-1,ASTM F963

Torque Clamp (Middle Size)

It is used for clamping the samples during torque testing.

Parameter

Torque Clamp

It is used for clamping the samples during torque testing.

Testing Standards

EN71-1, ISO8124-1,ASTM

Upper Stud Clamp

Uses:

Used to assist in Pull Test.

Standards Satisfied:

SL-S38

Three Claw Clamp

It is used to clamp the sample during the tensile test, to test the tension of the eyes, nose, ears, etc.,and also to test the tensile force of the screw.

Generally, it is used together with the push-pull force meter and the button tension meter.

Parameter

Can hold: 20MM

Tension load: 500N

Length: 125MM