Push-Pull Force Gauge

An analogue push-pull force gauge with interchangeable attachments for tension and compression measurements, such as toy component pull tests and button pull tests.

Items in this range

Push Pull Gauge

To check whether toys’ parts can be removed by tensile force, use a push-pull gauge. To record the force applied, a clamp and a force gauge are employed. Any toy component that a youngster can hold with at least their thumb and fingers or their teeth must pass the tension test.

Standards Satisfied

ASTM F963 CFR 16 CFR CPSC USA EN71 IS 9873(Part-1)

You must use a force gauge to measure push or pull force. Applying a constant push or pull while holding the gauge (force) parallel to the ground is required for the technique.

Dial Force Gauge

The dial force gauge is small, highly accurate, easy to operate and use, and can display both Newton and kilogram units. Its PEAK/TRACK knob can switch between peak load test and continuous load test. They are excellent products that can replace the old force meter and are widely used in electrical, high and low voltage electrical appliances, hardware, auto parts, lighters, ignition systems, light industry, machinery, textile, and other industries for pulling and pushing load test insertion force or pulling and destructive experiments.

Test Capacity:

10KG，20KG，30KG，50KG