Toy Chest Lid Durability Tester

Application :-
The instruments applies to test the durability of box cover. it uses fixtures to drive
the box cover move, after simulating a certain number and closing movements.
Check whether the toy lid hinge parts function are in good condition.
Standards :-
Subject the lid to 7000 opening-and-closing cycles, where one cycle consists of raising
the lid from its fully closed to its fully open position and returning it to fully closed. To
prevent undue stress on screws or other fasteners used to attach the lid support
mechanism, care should be taken not to force the lid beyond its normal arc of travel.
Complete a cycle of about 15s, 7000 times cycle should be completed within 72h, and
then check the lid and the lid support mechanism is intact or not.
GB 6675.2 section 5.13.2.2
ISO
Standards
ASTM
EN
GB
ASTM F834 section 5.1
EN-71-1 section 8.31.3
ISO 8124-1 section 5.13.2.2
Model RT-R02
Specimen quantity 1pc / time
Test speed (approx.).15s / cycle
Swinging rod rotation angle 0°~90°
Test times 7000times
Counter 0~999999 times, can be set
Sample max height 70cm
Display mode LCD
Drive mode Cylinder drive
Action mode Stop automatically
Power supply 1∮ AC 220V 50/60Hz
Dimensions(W x D x H) 360 x 350 x 1250 mm
Weight Approx. 25kg

Technical details

A toy Lid Durability Tester applies to test the durability of toys lid switch can be repeated.

The instrument with a rotating pendulum driven toys lid movements, simulated toy lid after a certain number of repeated opening and closing movements, the toy lid hinged part of the feature is intact.

Toy Lid Durability Tester complies with ASTM F963 National Safety Technical Code for Toys Manufacturing

Standards Satisfied

16 CFR 1500, ASTM F963 4.8, EN-71, ISO 8124, IS 9873(Part-1)