Heat Resistance Contact Tester

Application
This tester is used for determine the ability of shoe
materials to withstand the heat due to shoe making
operation such as embossing, crimping, toe and seat
flagging, hot blasting etc. Place the specimen in
contact with a hot metal surface under a constant
pressure for a short fixed period of time to assess
visually if there is any damage to its surface.
Feature
Copper test head, heat-resistance,wear-resistance, corrosion-resistance
Equip with temperature controlled device, automatically control heater temperature
Equip with air-bubble level to indicate whether machine in level
Cylindrical copper body Mass 200±20g, Lower end surface 25.5 x 25.5 mm
Metal heating block 530±50g
Test pressure 20±2kPa
Test Time 60s
Temperature range RT—–400
Specimen size 70 x 30mm
Power line 1AC 220V 50/60HZ 3A
Dimensions( L x W x H) 300x180x300mm
Weight 40 kg

Technical details

Shoe Heat Resistance Tester is to test shoe outsole and upper hot contact resistance ability especially for safety shoe. Heat Resistance Test Method includes ISO 20344, SATRA TM49, EN 344 and etc.

Heat Resistance Test Procedure

Press the constant temperature metal block which is made of copper on the Sample to check if the sample surface would be damaged or not.

This shoe hot contact resistance tester is equipped with a temperature indicator to display the temperature while on the moving arm, there is a weight to make sure the sample is applied with same pressure.

Warm tip: as toxic fumes might be released from some soling during the test, it is necessary to place the shoe heat resistance tester in a well ventilated area.

Shoe Heat Resistance Tester is to test shoe outsole and upper hot contact resistance ability, especially for safety shoe.