multifiber

Multifibre DW can be used as an adjacent fabric in many of the ISO 105 C Series and E Series of color fastness tests and also meets many chain store fastness test specifications.

It is produced with a narrow weave construction and contains the following components: secondary cellulose acetate, cotton, polyamide, polyester, acrylic and wool.

No weaving oils are used in the manufacture of SDC Multifibre DW, thus preventing the need for subsequent wet processing and heat treatments which are a potential source of inconsistency and contamination. This gives a dimensionally stable product that does not suffer slippage/separation of warp yarns or fraying during test procedures.

Multifibre DW undergoes rigorous quality control procedures, in accordance with ISO 105 F10, conducted by independent UK Accreditation Service accredited laboratories. All tests are carried out against a set specification and against a retained master batch at yarn as well as fabric stage. This ensures consistency of staining behaviour rather than simple conformity.

Major Advantages

• Narrow width construction for economy, ease of handling and stability in use.
• All batches tested against an internal master standard to ensure excellent continuity over time.
• Not scoured and then dried – removes process stages that pose a risk to continuity throughout the roll and across the width.
• Full batch traceability.

SDC MULTIFIBER DW

Sr.No	Supplier	CodeNo	Product	Unit
1.	SDC	2115	SDC Multifiber DW 10 meter roll ISO 105 F10	10m Pack
2.	SDC	2120	SDC Multifiber DW 50 meter roll ISO 105 F10	50m Pack
3.	SDC	2133	SDC Multifiber DW 10 X 4 cm ISO 105 F10	250 Pcs pack
4.	SDC	2143	SDC Multifiber DW 10 X 5 cm ISO 105 F10	200 Pcs pack
5.	SDC	2108	SDC Multifiber DW ID Strips	1000 Pcs pack

Copy Right@Ramp Impex Pvt.Ltd.

Disclaimer and Polices

Developed by Kiran Software Solutions